Victron BatteryProtect BP-100 – 100AMP – 6-35 VDC
BatteryProtect BP-100 – 100AMP – 6-35 VDC
Features:
- The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
- 12/24V auto ranging The BatteryProtect automatically detects system voltage
- Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.
- A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.
- Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
- Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
- Ignition proof No relays but MOSFET switches, and therefore no sparks.
- Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
![6pt[1]-warning-karibouusa.com](https://karibouusa.com/wp-content/uploads/2022/09/6pt1.png){kind=small}
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
| Weight | 1.1 lbs |
|---|---|
| Dimensions | 8 × 3 × 3 in |
| Manufacturer | VICTRON ENERGY |
| Part Number | BPR000100400 |
| Country Of Origin | INDIA |
| Quick Guide Literature | https://productimageserver.com/literature/quickGuide/82907QG.pdf |
| Brochure | https://productimageserver.com/literature/brochure/82907BR.pdf |
| Category Name | Electrical, Battery Management |
| UPC | 8719076021438 |
| Google Catagory | VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES |
Be the first to review “Victron BatteryProtect BP-100 – 100AMP – 6-35 VDC-BPR000100400”
You must be logged in to post a review.
-We Ship USA and Canada-
Call us for the worldwide shipping and best prices! 626-228-5021 or email
info@karibouusa.com
Orders ship within 2-3 business days
Free Shipping only by Usps, Fedex or UPS Ground Shipping (3-7 Business Days)
*Best Way Ground Shipping : $12.95 – We will choose the best way to ship the package. if you prefer UPS. Please don’t select the “Best Way Ground Shipping”, Otherwise we still ship Best Way Ground Shipping (Fedex, USPS) without notice.
*We ship from NJ and FL
*Free Shipping is not available on certain oversize items Rhodan, Dometic ECD.
Competitive Expedited options for Next Day or 2Day Air
*Please be aware that ground shipping does not guarantee specific delivery dates or times. If you have an event day or time-sensitive requirement, we recommend selecting our guarantee services, such as 3-day select or next-day air. These services are provided by the carrier and come with their own delivery guarantees. Kindly note that any claims or issues regarding delivery timelines should be addressed directly with the carrier as their responsibility.
*If you are looking at a special order item feel free to request a shipping quote.
*If a package requires signature and you won’t be available please get with us immediately so that we can have it held for you.
*Some oversize items are not included in our Free Shipping promo and will populate a fixed shipping cost at checkout.
*KaribouUSA.com attempts to publish an accurate catalog. Despite our best efforts, we are not responsible for typographical errors. Prices may change at any time. Shipping weights are actual weights and express shipments may weigh more or less due to dimensional weight calculations.
More: Shipping Policy
Return Policy
Our goal is to make sure you receive the correct item to meet your needs. Should you find it necessary to return an item, please follow these guidelines to insure we are able to get you a prompt refund and assist you in finding the correct item you require.
Requesting a Return Authorization is easy send request to support@karibouusa.com
Original manufacturer
Boxes/packaging: Items must be returned in original packaging including any manufacturer boxes. Please return these inside another box or wrapped and do not apply stickers, stamps, labels to manufacturer boxes, i.e. prop boxes. This may void your RA and incur a 20% restock fee.
Damaged in Transit:
For items damaged in transit please contact us immediately for assistance for special handling and filing of required paperwork to have your item replaced. Disputes of damaged products have to be reported to the carrier for resolution.
Incorrectly Shipped Items:
For items you received that did not match your original order specifications, please contact us for return and replacement handling.
support@karibouusa.com
Warranty Issues:
We will assist our customers with any warranty issues on products purchased through First Choice Marine, but we do not express or imply any warranty beyond that of the manufacturer. All defective products will observe manufacturer specific policies.
Condition of return items:
Items returned for credit must be returned in new, unused, uninstalled and saleable condition, including any retail packaging. Open any packaging with care when receiving your order so as not to damage it should you need to return the product. Items returned that do not meet this requirement are subject to a 20% restock fee.
Packaging, insuring and tracking:
You must send the return package signature required and insured at your expense (unless it is defective or the result of our error in shipment). Packaging of the return item is very important. Obtaining tracking is a good idea and if you do, please email or call us with that number so we can be expecting your return.
Damaged return package:
In the case of a returned item that is damaged in return shipment, you will be notified and if you insured the package you should be reimbursed by the shipper of the product. They retain the right to pick up the package for inspection. Although at that time it is no longer our responsibility, we will do everything possible to assist you in your damage claim. With proper packaging of your return item this should not be an issue.
Electronic Charts & Software:
ALL ELECTRONIC CHARTS AND SOFTWARE ARE NON-RETURNABLE. We do stand behind any manufacturers warranty on any purchased chart or software and will be happy to assist in a warranty situation. If you need a chart and are not sure if it will fit your unit, please send the unit model and serial so we can confirm fitment. Most manufacturers will work with you to exchange the chart for the proper one but is best to ask questions up front and confirm before ordering.
More: Return Policy Page.
Related products
Reviews
There are no reviews yet.