Victron Phoenix Smart IP43 Charger 24/25 (3) 120-240VAC Requires 5-15P Mains Cord
Phoenix Smart IP43 Charger 24/25 (3) 120-240VAC Requires 5-15P Mains Cord
With boat owners in mind, this adaptive 5-step charger can provide either 30A or 50A of charge to each of the three battery banks. Or the Phoenix 1+1 model provides 3A to the starter battery, the rest to the ‘house’ bank. 24V models are available with a 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.
Features:
- Bluetooth Smart built-in: The wireless solution to set up, monitor, update and synchronize Phoenix Smart IP43 Chargers.
- Phoenix Smart (1+1): two outputs to charge 2 battery banks: The second output, limited to approximately 4A and with a slightly lower output voltage, is intended to top up a starter battery.
- Phoenix Smart (3): three full current outputs to charge 3 battery banks: Each output can supply the full rated output current. But the total of the 3 outputs combined can never exceed the current rating of the charger.
- Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases.
- Adaptive 6-stage charge algorithm: bulk– absorption – recondition – float – storage – refresh: The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used.
- The right amount of charge: variable absorption time: When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge, the absorption time is automatically increased to make sure that the battery will be fully charged.
- Preventing damage due to excessive gassing: the BatterySafe mode: If in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached.
- Less maintenance and aging when the battery is not in use: the Storage Mode: The Storage Mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the Storage Mode, float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
- Also charges Li-ion (LiFePO4) batteries: Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively, full control of voltage and current can be achieved with Bluetooth.
- Fully programmable charge algorithm: The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button.
- Optional external battery voltage and temperature sensing via Bluetooth: A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more Phoenix Smart IP43 Chargers.
- Remote on-off: The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low.
- VE.Direct interface: For a wired data connection to a Color Control panel, PC, or other devices.
- Programmable relay: Can be programmed using the VE.Direct interface or a Bluetooth-enabled device to trip on an alarm or other events.
- Synchronized charging: Pairing two or more Phoenix Smart IP43 Chargers in a VE.Smart Network, enables synchronized charging. This improves the charge efficiency and battery life.
Please contact your dealer for any returns, repairs or support issues related to this product.
| Weight | 7 lbs |
|---|---|
| Dimensions | 11 × 10 × 6 in |
| Manufacturer | VICTRON ENERGY |
| Part Number | PSC242553095 |
| Country Of Origin | MALAYSIA |
| Quick Guide Literature | https://productimageserver.com/literature/quickGuide/96858QG.pdf |
| Brochure | https://productimageserver.com/literature/brochure/96858BR.pdf |
| Category Name | Electrical, Battery Chargers |
| UPC | 8719076053552 |
| Google Catagory | VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES |
Be the first to review “Victron Phoenix Smart IP43 Charger 24/25 (3) 120-240VAC Requires 5-15P Mains Cord-PSC242553095”
You must be logged in to post a review.
-We Ship USA and Canada-
Call us for the worldwide shipping and best prices! 626-228-5021 or email
info@karibouusa.com
Orders ship within 2-3 business days
Free Shipping only by Usps, Fedex or UPS Ground Shipping (3-7 Business Days)
*Best Way Ground Shipping : $12.95 – We will choose the best way to ship the package. if you prefer UPS. Please don’t select the “Best Way Ground Shipping”, Otherwise we still ship Best Way Ground Shipping (Fedex, USPS) without notice.
*We ship from NJ and FL
*Free Shipping is not available on certain oversize items Rhodan, Dometic ECD.
Competitive Expedited options for Next Day or 2Day Air
*Please be aware that ground shipping does not guarantee specific delivery dates or times. If you have an event day or time-sensitive requirement, we recommend selecting our guarantee services, such as 3-day select or next-day air. These services are provided by the carrier and come with their own delivery guarantees. Kindly note that any claims or issues regarding delivery timelines should be addressed directly with the carrier as their responsibility.
*If you are looking at a special order item feel free to request a shipping quote.
*If a package requires signature and you won’t be available please get with us immediately so that we can have it held for you.
*Some oversize items are not included in our Free Shipping promo and will populate a fixed shipping cost at checkout.
*KaribouUSA.com attempts to publish an accurate catalog. Despite our best efforts, we are not responsible for typographical errors. Prices may change at any time. Shipping weights are actual weights and express shipments may weigh more or less due to dimensional weight calculations.
More: Shipping Policy
Return Policy
Our goal is to make sure you receive the correct item to meet your needs. Should you find it necessary to return an item, please follow these guidelines to insure we are able to get you a prompt refund and assist you in finding the correct item you require.
Requesting a Return Authorization is easy send request to support@karibouusa.com
Original manufacturer
Boxes/packaging: Items must be returned in original packaging including any manufacturer boxes. Please return these inside another box or wrapped and do not apply stickers, stamps, labels to manufacturer boxes, i.e. prop boxes. This may void your RA and incur a 20% restock fee.
Damaged in Transit:
For items damaged in transit please contact us immediately for assistance for special handling and filing of required paperwork to have your item replaced. Disputes of damaged products have to be reported to the carrier for resolution.
Incorrectly Shipped Items:
For items you received that did not match your original order specifications, please contact us for return and replacement handling.
support@karibouusa.com
Warranty Issues:
We will assist our customers with any warranty issues on products purchased through First Choice Marine, but we do not express or imply any warranty beyond that of the manufacturer. All defective products will observe manufacturer specific policies.
Condition of return items:
Items returned for credit must be returned in new, unused, uninstalled and saleable condition, including any retail packaging. Open any packaging with care when receiving your order so as not to damage it should you need to return the product. Items returned that do not meet this requirement are subject to a 20% restock fee.
Packaging, insuring and tracking:
You must send the return package signature required and insured at your expense (unless it is defective or the result of our error in shipment). Packaging of the return item is very important. Obtaining tracking is a good idea and if you do, please email or call us with that number so we can be expecting your return.
Damaged return package:
In the case of a returned item that is damaged in return shipment, you will be notified and if you insured the package you should be reimbursed by the shipper of the product. They retain the right to pick up the package for inspection. Although at that time it is no longer our responsibility, we will do everything possible to assist you in your damage claim. With proper packaging of your return item this should not be an issue.
Electronic Charts & Software:
ALL ELECTRONIC CHARTS AND SOFTWARE ARE NON-RETURNABLE. We do stand behind any manufacturers warranty on any purchased chart or software and will be happy to assist in a warranty situation. If you need a chart and are not sure if it will fit your unit, please send the unit model and serial so we can confirm fitment. Most manufacturers will work with you to exchange the chart for the proper one but is best to ask questions up front and confirm before ordering.
More: Return Policy Page.
Related products
Reviews
There are no reviews yet.